|
|
|
|
.gif) |
| Model
JYP130 Hot Melt Adhesive Spraying Machine |
Function & Speciality：
1、inner and surface of hot glue container
are adopted with special fiourate coating
to anti-carbonizatioq to ensure the adhesive
in the beststate, reduce blocking.
2、Stand alone pump turn speed is interchange
motor(conversion govern) number show accurate
con-rol adhesive capacity export.
3、Rotation speed of lone pump is displayed
through alternative motor(frequency governor)
with digita display to make the volume of
adhesive output precise.
4、Filter of pump can eliminate the pollution
to prevent the exhaust nozzle blocking.
5、Frozen boot of system can delay device
to prevent the pump damaging.... |
|
|
|
|
|
|
|
| Model
JYP045 Hot Melt Adhesive Spraying Machine |
Function & Speciality：
1、inner and surface of hot glue container
are adopted with special fiourate coating
to anti-carbonizatioq to ensure the adhesive
in the beststate, reduce blocking.
2、Stand alone pump turn speed is interchange
motor(conversion govern) number show accurate
con-rol adhesive capacity export.
3、Rotation speed of lone pump is displayed
through alternative motor(frequency governor)
with digita display to make the volume of
adhesive output precise.
4、Filter of pump can eliminate the pollution
to prevent the exhaust nozzle blocking.
5、Frozen boot of system can delay device
to prevent the pump damaging.... |
|
|
|
|
|
|
|
| Model
JYP015 Hot Melt Equipment |
Main
characteristics：
1、Surface of melting jar is coated with
Teflon in order to avoid charring and reduce
jam.
2、Progressive heat and multiplayer filt.
3、Double-layer precision gear pump and double
loop design, colloid output is equality
and steady.
4、Temperature is accurately controlled by
PID intelligentized controller.
5、With the function of n. ultra high temperature
protection. ... |
|
|
|
|
|
|
|
| Model
JYP005 Hot Melt Adhesive Spraying Machine |
Function & Speciality：
1、Surface of melting jar is coated with
Teflon in order to avoid charring and reduce
jam.
2、Two-shower nozzle, obviously improve work
efficiency.
3、Spraying mouth can be momentarily replaced
with application,there's punctation, strip,
reticulation,etc..
4、Foot plate type controlling switch,convenient
to all operations.
5、Conveniently adding colloid and high security.
... |
|
|
|
|
|
|
|
| Model
JYG Hot Melt Adhesive Machine |
Function & Speciality：
1、Safe design to prevent your hand be engulfed
into idler wheel and avoid work piece into
colloid trough
2、Spreading width can be momentarily designed
according to the clients;requirement,idler
wheel dimension can be discretionarily choose
between 30-300mm
3、Adjust the speed of idler wheel according
to the working requirement,both colloid
trough and idler wheel can control temperature
independently.
4、Motor with stepless shift,conveniently
use all materials ... |
|
|
|
|
|
|
|
| Model
JYP003 Hot Melt Adhesive Machine |
Function & Speciality：
1、Surface of melting jar is coated with
Teflon in order to avoid charring and reduce
jam.
2、Temperature is accurately controlled by
PID intelligentized controller which can
adjust temperature with the quality of colloid,
and with the function of n.Ultra high temperature
protection and delay spray colloid.
3、Spraying mouth can be momentarily replaced
with application, it'sconvenient to all
operations.
4、Foot plate type controlling switch,convenient
to all operations.
5、Conveniently adding colloid and high security....
|
|
|
|
|
