Hot Melt Adhesives stand out among many adhesives and are widely used in various industries. The reason is very simple, hot melt adhesive bonding strength is excellent, even if it is a long time contact is more difficult to harm the human body, with green environmental protection characteristics, which is unparalleled superiority of other adhesives.     

Hot melt adhesive in the fight against the new crown epidemic huge contribution to the use of hot melt adhesive's excellent performance in masks and protective clothing play a key role, not only bonding non-woven fabrics, breathable film and other materials, and in line with the 'plastic polypropylene (PP) meltblown speciality materials,' the use of the standard, which can effectively block the spread of viruses and reduce the hazards of toxic substances, to protect the health of health care workers! So in addition to these two, today we will unveil several common applications in life.

First, direct contact with the skin class, surgical hole towel (high bonding strength requirements) Structure: generally woven cloth and other materials as a substrate, coated with medical zinc oxide or transparent hot melt adhesive made of rolled into, generally can be divided into ordinary, waterproof, sports three, often white cotton, non-woven, PE perforated film, cotton paper and artificial silk, etc. as a substrate, made of the corresponding medical tape and so on. It has good adhesive holding performance, good skin adhesion, superior anti-aging performance, moderate unwinding force and non-allergenic. In addition, the surface of some substrates are coated with unwinding agents, which help to reduce the resistance when unwinding.

Gluing method: Generally, the majority of the substrate is directly scraped, but there are also a few first scraped release paper or rubber rollers and then transferred to the way of gluing.

Width of substrate: 80cm to 120cm.

Production speed: 20-50m/min uncoiling, slitting, rewinding after the finished product.

1, medical tape: generally used for dressings, catheters and other wrapping and fixation, common white cotton tape, sports bandage, silk tape, PE perforated film tape, cotton paper tape, etc.;

2, wound dressings are generally coated by the surface of the adhesive medical non-woven or medical PE/PU film and absorbent pads and isolation film composition, for surgical wounds or dressings fixed. Common infusion patch, band-aid, dressing patch, etc.

Second, non-direct contact with the skin class, medical composite products (ordinary or high-strength structural adhesive)

Third, aseptic bags 'medical paper bags' Adaptation scope: mainly used in hospitals, clinics and a variety of medical equipment, accessories, sterilisation packaging. Characteristics: Good packaging solution design, can provide uncoated, water-based adhesive coating, as well as hot melt adhesive mesh coating, hot melt adhesive frame coating of flat type, three-dimensional type of paper paper bags. Unique easy-peel design provides clearly visualised heat seal transfer. High-performance heat seal effect provides uniform seal strength and safe, clean peel-off.      Medical frame coated product features: good bacteria barrier, waterproof, with frame coated adhesive design, good heat sealability. Printed with sterilisation logo, easy and safe to use. Material structure: coated paper + lamination paper. In the eyes of the public, hot melt adhesive should be used in industry more, but in fact, it is not, it is fully integrated into our lives, applied to all levels, in short, hot melt adhesive is one of the very common application of environmentally friendly adhesives, in addition to the medical industry, hot melt adhesive in other industries to play the same character of its 'resilience'.